หน้าแรก / เครื่องยนต์ / เครื่องยนต์เบนซิน /
/

เครื่องยนต์เบนซิน 170F ระบายความร้อนด้วยอากาศ

170F|HP ฮิต|210cc|1 สูบ|โอเอชวี
ce 1
TUV
กรมอุทยานฯ
2 รับประกันปี
อีป้า 1
  • New technology, super silent
  • ใช้เวลานาน
  • Economic, reliable, durable
  • CE,ISO9001 Standard.
  • รอบต่อนาทีสูง
  • ทำงานได้อย่างราบรื่นโดยมีการสั่นสะเทือนน้อยที่สุด
  • น้ำหนักเบา ต้นทุนต่ำ
ไม่มียี่ห้อ30 ชุด
มาตรฐาน OEM50 ชุด
OEM พิเศษ100 ชุด

ข้อมูลจำเพาะ 170F

ข้อมูลจำเพาะของเครื่องยนต์และการปล่อยไอเสีย
รุ่นเครื่องยนต์บีเอส170เอฟ
ชนิดเชื้อเพลิงน้ำมันเบนซิน
ความเร็วรอบเครื่องยนต์3000 / 3600RPM
เบื่อ * ช่วงชัก70*54/56 mm
การกระจัดของเครื่องยนต์210cc
power of engine (hp)7.0HP
อัตราส่วนการบีบอัด8.2:1
ประเภทเครื่องยนต์1-Cylinder, Air-Cooled, 4-Stroke, Direct Injected, OHV
engine oil grade#5W-40
ความจุเชื้อเพลิง3.6L
ความจุน้ำมัน0.6L
low oil shutdown/alertใช่
recoil startใช่
เริ่มต้นไฟฟ้าสามารถเลือกหรือไม่เลือกก็ได้
fuel consumption radio≤395g/kW/h
ระบบจุดระเบิดTCI

BS170F is an air cooled petrol engine. The purpose of 170F engine is to convert internal energy into kinetic energy. It uses gasoline as fuel, which is pumped through a jet system into the cylinder and then makes it inflate. It has various advantages such as high speed, simple structure, light quality, low cost, stable operation convenient maintenance, etc.

The air-cooled system is efficient. The small size and compact structure. It is portable and movable. It has low noise level and vibration, large stable power output. It is easy to pull and quick to start. Low fuel consumption makes it economical. The engine is also suitable for generator, water pump, compressor, mini-tiller, high pressure washer

The following points are noted while using 170F air cooled petrol engine:

  • During the off-job period after the engine overhaul, strict operation rules and regulations on load reduction and deceleration should be implemented;
  • Keep the correct ignition timing to avoid setting the ignition timing too early and causing the engine to burst and overheat;
  • Ensure sufficient oil that meets the original factory specifications. Check the oil pressure frequently, and change the oil according to the requirements of the departure period;
  • Add enough cooling water and always check the cooling water and water temperature.

BISON 170F air cooled petrol engine provides engine dealers with several advantages:

  • Supply capacity: with the ability to produce 10,000 sets per month, dealers don’t have to worry about inventory shortages and shipment delays.
  • Certification: BISON engines have certificates such as CE and ISO, ensuring that the generator meets necessary safety, health and environmental standards, increasing the credibility for dealers and customers.
  • Warranty: BISON offers one-year warranty and any issues your customers may have during the warranty period will be resolved, thereby increasing trust in your brand.
  • Customization options: BISON offers customization options such as recoil start, electric start and color changes. This flexibility allows dealers to meet a wider range of customer needs, thereby expanding market reach and increasing sales potential.
  • By leveraging these strengths, engine dealers can strengthen their market competitiveness, attract more customers.If you want to get more information about 170F air cooled petrol engine, you can contact us directly!
170f air cooled petrol engine details 4
170f air cooled petrol engine details 2
170f air cooled petrol engine details
170f air cooled petrol engine details 3
170f air cooled petrol engine details 5
170f air cooled petrol engine details 6

ชิ้นส่วนเครื่องยนต์ของเรา

ก้านสูบเครื่องยนต์

ก้านสูบเครื่องยนต์

ความแข็งแรงเชิงกลเป็นของความหนาแน่นของอลูมิเนียมหล่อโลหะผสมอลูมิเนียม ADC12 และการตรวจสอบน้ำหนักสามารถรับประกันความสอดคล้องของความต้านทานแรงดึงของโครงสร้างและการประมวลผล CPK

ลูกสูบเครื่องยนต์

ลูกสูบเครื่องยนต์

ใช้วัสดุ Z109 เพื่อเพิ่มความทนทานต่อการสึกหรอและลดการเสียรูปจากความร้อน เพื่อให้แน่ใจว่าน้ำหนักของลูกสูบและความแม่นยำของการตัดเฉือน

กรณีเครื่องยนต์

เคสเครื่องยนต์

การใช้ฟิกซ์เจอร์ที่มีความแม่นยำสูง อุปกรณ์แมชชีนเซ็นเตอร์เพื่อให้มั่นใจในความแม่นยำ และความแข็งแรงของวัสดุที่มีความหนาแน่นสูง กล่องของ BISON สามารถผ่านการทดสอบความทนทานเป็นเวลา 125 ชั่วโมง และตรงตามมาตรฐานการปล่อยมลพิษ

ไอดีของเครื่องยนต์และวาล์วไอเสีย

วาล์วไอดีและไอเสีย

วาล์วทำจากวัสดุ 40Cr10SiMo วาล์วไอเสียสามารถทนต่ออุณหภูมิการเผาไหม้ได้สูง เมื่อโหลดมีน้ำหนักมากหรือสภาวะการเผาไหม้ผิดปกติ ขีดจำกัดอุณหภูมิจะไม่ได้รับผลกระทบหากขีดจำกัดอุณหภูมิต่ำกว่า 700-780°C

การทดสอบเครื่องยนต์

การทดสอบเครื่องยนต์วัวกระทิง

มีไว้สำหรับการทดสอบเครื่องยนต์โดยเฉพาะ และติดตั้งการควบคุมคุณภาพสำหรับการทดสอบตัวอย่าง BISON ตรวจสอบและยืนยันประสิทธิภาพและความน่าเชื่อถือของเครื่องยนต์แต่ละชุดเพื่อหลีกเลี่ยงความล้มเหลวของผลิตภัณฑ์ที่อาจเกิดขึ้น

รับประกันประสิทธิภาพการซีลของโครงสร้างตัวข้อเหวี่ยงและการติดตั้ง จากการทดสอบเครื่องมือระดับมืออาชีพ สามารถพบข้อบกพร่องในการซีลที่ไม่ดีของการติดตั้งและวัสดุ เพื่อหลีกเลี่ยงการรั่วไหลของน้ำมันและการรั่วไหลของน้ำมันของเครื่องยนต์ และรับประกันประสิทธิภาพการใช้พลังงานที่แท้จริง

สามารถยืนยันความเสถียรของโหลดเอาท์พุตของกำลังไฟฟ้าได้ทางออนไลน์ และสามารถล็อคการกำหนดค่าได้หลังจากการทำให้เสถียรเพื่อให้แน่ใจว่าผลิตภัณฑ์มีความสม่ำเสมอสูง

โดยช่างมืออาชีพที่มีประสบการณ์ 15-20 ปี

การว่าจ้างประสิทธิภาพ

การว่าจ้างประสิทธิภาพ

ประกอบเครื่องยนต์

ประกอบเครื่องยนต์

งานศิลปะใช่หรือไม่

อาร์ตเวิร์ค QA

การตรวจสอบอย่างเต็มรูปแบบ

การตรวจสอบอย่างเต็มรูปแบบ

การตรวจสอบเฉพาะทางเครื่องยนต์

การตรวจสอบเฉพาะทางเครื่องยนต์

การประกอบชิ้นส่วน

การประกอบชิ้นส่วน

การประกอบแกน

การประกอบแกน

การตรวจสอบเฉพาะด้านกำลัง

การตรวจสอบเฉพาะด้านกำลัง

ระบบ QC

During the production, BISON care about the quality for each 170F air cooled petrol engine, that’s why we strictly follow the step of our QC system. Every product will be well test during the production line, we separate the faulty one to special area-faulty zone, where the place will collect faulty product and send to repair.

ระบบ ERP

ด้วยการใช้ระบบ ERP อย่างเต็มรูปแบบ เมื่อเราได้รับคำสั่งซื้อของคุณ ขั้นตอนทั้งหมดดำเนินไปอย่างเป็นระบบ ช่วยปรับปรุงประสิทธิภาพการทำงานของเราและลดอัตราข้อผิดพลาดของเรา。และทำให้ลูกค้าที่ภักดีของเรามีความมั่นใจมากขึ้น

ระบบการผลิต

From the beginning of the product production, BISON skilled operate equipment to manufacture high level quality 170F air cooled petrol engine. All steps by our own workers.

ข้อมูลการรับประกัน

พนักงานของแผนกบริการบำรุงรักษาต้องเรียนรู้ ปรับปรุง และปรับปรุงระดับเทคนิคของตนเองอย่างต่อเนื่อง ให้บริการแก่ลูกค้า และปฏิบัติตามระบบของบริษัทที่เกี่ยวข้องและจรรยาบรรณอย่างเคร่งครัดเพื่อให้แน่ใจว่าพวกเขา "เป็นมิตร กระตือรือร้น และตอบสนอง" เราจะนำเสนอ การสนับสนุนด้านเทคนิคผ่านทางโทรศัพท์ อินเทอร์เน็ต หากลูกค้าต้องการ

หากการขนส่ง ติดตั้ง เกิดปัญหาการใช้งานที่ผิดพลาดจนทำให้ชิ้นส่วนของอุปกรณ์เสียหายนั้นจะไม่มีการรับประกันแต่เราจะนำเสนอชิ้นส่วนให้กับลูกค้าในราคาย่อมเยา

ชิ้นส่วนเครื่องยนต์เบนซิน

อุปกรณ์เสริมลดราคา

ออนไลน์ตลอด 24 ชั่วโมง ตอบกลับ 5 นาที

ออนไลน์ตลอด 24 ชั่วโมง ตอบกลับ 5 นาที

วิศวกรบริการนอกสถานที่

วิศวกรบริการนอกสถานที่

บรรจุภัณฑ์ & จัดส่ง

รายละเอียดบรรจุภัณฑ์: กล่องสีน้ำตาลเข้ม เครื่องยนต์ได้รับการคุ้มครองด้วยถุงโพลี ไม้ 1 ชิ้น / กล่อง ระยะเวลาดำเนินการ: จัดส่งภายใน 25 วันหลังจากการชำระเงิน

พูดคุยกับผู้จัดการฝ่ายขาย BISON

ติดต่อเราวันนี้เพื่อรับคำแนะนำจากผู้เชี่ยวชาญ

บริการ

สินค้า

เครื่องยนต์เบนซิน 168f 1 4 จังหวะ

เครื่องยนต์เบนซิน 168 จังหวะ 1F-4

มอเตอร์เบนซิน2

เครื่องยนต์เบนซิน EY20 5hp

เครื่องยนต์เบนซินความเร็วสูง

เครื่องยนต์เบนซินความเร็วสูง

เครื่องยนต์สันดาปน้ำมันเบนซิน

เครื่องยนต์สันดาปเบนซิน 2.5hp 152F

ไม่สามารถรับเพียงพอ?

สมัครรับข้อเสนอสุดพิเศษและอัพเดทสินค้ามาใหม่